Spectra Verde 4U, Руководство пользователя, Страница: 172 / 244

Appendix A — Network File Interface Restoring Files From an NFI Target BlackPearl System
September 2017 User Guide — Spectra Verde Array
172
Restore Files Using the Deep Storage Browser
Use the instructions in this section to restore files from the BlackPearl
system using the Deep Storage Browser.
Retrieve S3 Credentials from the BlackPearl System
Before you can configure and use the Deep Storage Browser, you must
retrieve the S3 credentials for the user configured in the Verde array NFI
service.

If you do not know which user is configured in the NFI service, see
Configure Network File Interface on page 165 .

If you already know the S3 credentials of the user, skip to Download
the Deep Storage Browser on page 173 .
Use the instructions in this section to retrieve the S3 credentials from the
BlackPearl system.
1.
Log into the BlackPearl interface as described in the Spectra BlackPearl
User Guide .
2.
From the menu bar, select Configuration > Users. The Users screen
displays.
3.
Select the user configured in the Verde NFI service from the User pane
of the Users screen, and then select Action > Show S
3
Credentials . The
S3 Credentials dialog box displays.
4. Record the S 3 Access ID and S 3 Secret Key for use when configuring the
Deep Storage Browser to access the BlackPearl system.
Note: It is helpful to leave the S3 Credentials dialog box open on the
BlackPearl user interface, so that you can easily copy and paste
the credential values when configuring the Deep Storage
Browser.
Figure 132 The S3 Credentials dialog box.