18
Installation Instructions
Receiver
NOTE: Depending on how you install the receiver, you may
need to change the orientation of the displayed data on the
front panel screen. This is possible using one of the options
in the
Display Settings
menu (see
).
Tripod Mount
In land surveying applications, for example when used as a
roaming base mounted on a tripod, the SP90m can be
secured on one of the legs of the tripod using the lug (
[A]
)
fastened on its bottom side (see illustration below).
The lug may be secured onto the receiver case in two different
ways allowing the receiver to be installed either with its front
panel upwards (
[1]
) or sideways (
[2]
) (recommended).
Bottom Plane Mount
This type of installation is suitable for machine guidance or
marine applications. The SP90m is secured from underneath
the receiver case, using four screws M4.
Preparing the support on which the receiver will be mounted
only consists of drilling four holes, forming a simple,
[1]
[A]
[2]
100 mm
100 mm
Содержание SP90m
Страница 1: ...User Guide SP90m GNSS Receiver From Firmware v3 61...
Страница 6: ......
Страница 12: ......