SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
6 –
Menu Key
106
5. The result of the 3PT angle appears. Press
DSP
to switch
between the two pages.
6. To:
–
Continue in 3 Pt. Angle function, press
NEXT
.
–
Quit, press
END
. The screen returns to the
Inverse
menu.
Azimuth and Distance (AZ&Dist)
Use an angle and distance to calculate a coordinate.
There are two ways to calculate new points using the AZ&Dist function.
AZ+HD
1. From the
Cogo
menu, press
[2]
(or press
[v]
and
[REC/ENT]
) to select
AZ&Dist
.
The
AZ&Dist
menu appears.
2. Press
[1]
(or press
[v]
and
[REC/ENT]
) to select
AZ+HD
.
The
Input PT
screen appears.
3. Enter a point name for the base PT and then press
[REC/ENT]
.
For the input method, see Step 2 of the Inverse PT-PT
method on page 104.
The
Input AZ
screen appears.
4. Enter the azimuth (AZ), horizontal distance (HD), and
vertical distance (dVD) and then press
[REC/ENT]
.
Note –
To enter 123°45'45", type 123.4545 and press
[REC/ENT]
. If a value is not entered in the dVD field, the value
0.000 is used.
