Spectra Precision EPOCH 50, Руководство пользователя

Страница: 5 / 50

EPOCH 50 GNSS System User Guide 3
Safety Information
Before you use a Spectra Precision
®
EPOCH
®
50 GNSS system, make sure that you
have read and understood this guide, as well as the safety requirements listed in this
chapter.
2.1
Warnings and Cautions
An absence of specific alerts does not mean that there are no safety risks involved.
Always follow the instructions that accompany a Warning or Caution. The information
they provide is intended to minimize the risk of personal injury and/or damage to the
equipment. In particular, observe safety instructions that are presented in the
following formats:
C
WARNING – A Warning alerts you to a likely risk of serious injury to your person and/or
damage to the equipment. A warning identifies the nature of the risk and the extent of
possible injury and/or damage. It also describes how to protect yourself and/or the
equipment from this risk. Warnings that appear in the text are repeated at the front of
the manual.
C
CAUTION – A Caution alerts you to a possible risk of damage to the equipment and/or
loss of data. A Caution describes how to protect the equipment and/or data from this risk.
2.2
Regulations and safety
The receivers contain an internal radio-modem and can send signals through
Bluetooth
®
wireless technology or through an external data communications radio.
Regulations regarding the use of the Ultra High Frequency (UHF) radio-modems vary
greatly from country to country. In some countries, the unit can be used without
obtaining an end-user license. Other countries require end-user licensing. For licensing
information, consult your local Spectra Precision dealer. Bluetooth operates in license-
free bands.
Before operating this receiver, determine if authorization or a license to operate the
receiver is required in your country. It is the responsibility of the end user to obtain an
operator’s permit or license for the receiver for the location or country of use. For FCC
regulations, see
Legal notices, page 2 .
2.3
Type approval
Type approval, or acceptance, covers technical parameters of the equipment related to
emissions that can cause interference. Type approval is granted to the manufacturer of
the transmission equipment, independent from the operation or licensing of the units.
Some countries have unique technical requirements for operation in particular