Spectra Precision Epoch 25 L1, Руководство пользователя

Страница: 17 / 50

Epoch 25 L1/L2 GPS System User Guide
15
Setup, Connection, and Cabling
2
Step 2: Set up the receiver on a tripod
Note –
Take care to follow this procedure to ensure that the cable does not twist and the
antenna seats flush to the top of receiver.
1. Connect the GPS antenna cable to the Epoch L1/L2 GPS antenna and then
attach the antenna to the base receiver.
2. Connect the cable to the receiver.
3. Attach the antenna to the base receiver and place the antenna on the tripod.
4. Install the antenna, receiver, and extension pole onto the tribrach.
You can either place the receiver in the transport case or below the antenna on
the tripod.
5. Attach the external radio to the tripod.
6. Connect the antenna to the external radio.
7. Connect the radio cable between the radio and the receiver.
8. Connect the radio and the receiver to the external battery.
Figure 2.3 Epoch GPS receiver, base setup
Epoch 25 GPS antenna
GPS antenna cable
External radio
Base receiver
Tribrach
Extension pole
External battery
Radio cable