Spectra Logic NAStape 100, Руководство пользователя

Страница: 22 / 87

Chapter 3. Using the HTTP Interface
22
Options Configuration
This section lists the available licensed options and options not yet licensed. You can
select which licensed option you would like enabled here. Once you have made your
selection, select
Change .
Not Licensed
This option is not available until purchased and activated with a key code.
Licensed/Disabled
The option has been purchased but is currently inactive.
Licensed/Enabled
The option is currently licensed and active.
Note:
Ethernet storage devices may have only one protocol active at any
given time. Enabling one Ethernet protocol will automatically
disable all other Ethernet protocols that are currently licensed.
You can configure the Ethernet interface using this screen.
Ethernet
Interface
Figure 3-4 Ethernet Port Setup screen.