Chapter 7 - Configuring Network Attached Storage
Configure NAS Services
3.
Select
Action > Create
. The Add Replication Target dialog box displays.
Figure 146
The Add Replication Target dialog box.
4.
Enter the IP address or hostname of the target’s management port in the
Replication
Target
field.
Note:
Do not use http:// or https:// to precede the IP address or hostname.
5.
Enter the IP address of the target’s data port in the
Replication Target Data IP Address
field.
Note:
Do not use http:// or https:// to precede the IP address or hostname.
6.
Enter the username of a user with administrator privileges configured on the target in
the
Username
field.
7.
Enter the user password in the
Password
field, if one is set. Otherwise, leave the field
blank.
8.
Select the
Enable Secure Transfer
check box to configure the system to encrypt the
replicated data before transferring it to the target. Data is encrypted using Secure Socket
Layer (SSL).
9.
Click
Save
.
Configure Volumes for NAS Replication
1.
In the source system’s BlackPearl user interface, select
Configuration > NAS > Volumes
.
The Volumes screen displays.
2.
Double-click the volume name you want to configure to replicate, or select the volume
and select
Action > Show Details
. The details screen for the volume displays.
November 2020
User Guide-BlackPearl Converged Storage System
- 239 -
