Chapter 6 - Additional Configuration Options
Configure Network Connections and Settings
Edit the System Name
1.
From the menu bar, select
Configuration > Network
, or click the Network pane from the
Dashboard screen. The Network screen displays.
2.
In the Network Interfaces pane, double-click the system name, or select the system name
and then select
Action > Edit
. The Edit System Name dialog box displays.
Figure 93
The Edit System Name dialog box.
3.
Enter the desired
Name
for the system. The system only allows letters, numbers, and the
hyphen character (-) in the system name.
Notes:
• The first section of the system name, up to a delimiter (for example, a period)
cannot be longer than 15 characters:
•
Valid
- BlackPearl.domain.com
•
Invalid
- BlackPearlSystem.domain.com
• If your system is using firmware BlackPearl 3.2.2, or earlier, there are no
character restrictions on system names. However, Spectra Logic recommends
limiting system names to letters, numbers, and hyphens to maintain
compatibility with the RFC 1123 standard.
• The system does not change previously configured system names using special
characters when upgrading to BlackPearl 3.3, or later.
4.
Click
Save
.
November 2020
User Guide-BlackPearl Converged Storage System
- 182 -
