Chapter 4 - Configuring Advanced Bucket Management
Create a Bucket
6.
Select or clear the
Replicate Deletes
check box. When selected, any time a replicated file
is deleted from the source system, it is also deleted from the target.
Note:
Replicated objects do not immediately delete. Objects are only deleted after
running a verify operation on the bucket.
7.
If desired, modify the
Max Blob Part Size
. This parameter defines the maximum object
part size used when sending data to a Microsoft Azure target. Larger blob sizes make
public cloud workflows simpler, but may make it more difficult or impossible to reliably
transmit blobs. Less reliable network connections to the public cloud require smaller
blob sizes. The maximum blob size is 1 TB. The default maximum blob size is
1 GB.
Note:
To prevent data transfer failures, it is important that this value not exceed the
maximum blob size that the target is able to accept.
8.
Click
Create
. The new Microsoft Azure replication rule displays on the Data Policy
details screen.
C
REATE A
B
UCKET
Buckets are data transfer targets for read and write operations. The system stages data
written to it on the cache and optimizes how it writes buckets to storage domains for best
performance.
Clients write data to the system using a “bulk PUT” command, and read from the system
with a “bulk GET” command. For more information on using these commands see the
Spectra BlackPearl Spectra S3 API Reference
.
Note:
Buckets can also be created using a Spectra S3 client, or
Spectra S3 API.
Use the instructions in this section to configure a bucket.
1.
From the menu bar, select
Configuration > Buckets
. The Buckets screen displays.
Figure 49
The Buckets screen.
November 2020
User Guide-BlackPearl Converged Storage System
- 136 -
