Spectra 20K/64K Library AIT-4 Drive Upgrade
4
Replacing Drives
Moving Original Drives Off-line
1.
On the Library Controller, select
Toolbars -> General.
The General toolbar
displays.
2.
Select
Drive Config
. The Drive Configuration screen appears Figure 2.
3.
Select the drive you want to replace, the select
Replace
. A dialog box series
displays, first asking whether it is
Okay to Replace Drive?
then
“Are you sure
you want to open the door?
4.
Select Okay for each. This powers down the drive and disengages the solenoid
latches on the front door. A dialog box displays the message
Open Door and
Replace Drive
.
Close and Latch Door
.
Tap Okay when complete
.
Note:
Do
not
select
OK
until you have completed the procedure.
Figure 2
The Drive Configuration Screen.
