Wall Mount
User Guide
for the Infrared Security Camera with Sound Sensing
Model: SP 06510
IMPORTANT
Thank you for purchasing the Spectare Infrared
Security Camera. Please take some time
to read through and follow these important safety
and operation instructions.
WARNING: TO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
CAUTION: RISK OF ELECTRIC SHOCK. DO NOT
DISASSEMBLE THIS UNIT. TO PREVENT THE RISK
OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO USER- SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
VENTILATION
- The device should be situated so
that its location or position does not interfere with
its proper ventilation. For example, the unit should
not be situated on a bed, sofa, rug or similar sur
-
face that may block the ventilation openings.
HEAT
- The device should be situated away from
sources of high heat such as radiators or stoves.
POWER SOURCE
- The device should be connected
to a power supply only of the type described in the
technical specification of this user guide.
CLEANING
- The device should be cleaned gently
using a soft cloth dampened with water. Do not
clean the inside of the unit.
NON USE PERIOD
- The power cord for the device
should be unplugged from the outlet when the unit
is left unused for a long period of time.
AVOIDING SURGES
- For added protection during a
lightning storm, unplug the device from wall outlets
to prevent damage to the product due to power line
surges.
OVERLOADING
- Do not overload wall outlets or
extension cords, as this may result in fire or electri
-
cal shock.
SERVICING
- The user should not attempt to service
the device beyond those means described in the
operating instructions. All other servicing should
be referred to qualified service personnel.
Compatibility
Contact
For questions and support on this product that can
Warranty
not be solved by your retailer please contact:
Spectare Products
6081 Meridian Ave Suite 70-308
San Jose, CA 95120
http://spectareproducts.com
[email protected]
The Spectare Logo and the Spectare brand are
trademarked by SuMaWah LLC, San Jose, CA.
Copyright ©2006 SuMaWah LLC.
All Rights Reserved Worldwide.
Installing the Camera
1. Find a location for the Camera where its view is unobstructed and has access to electric outlet.
2. If neccessary, mount the Camera using the Velcro Strap or Wall Mounting Hardware. If mounting on a
wall, use the provided Wall Mounting Instructions and Drilling Template .
Velcro Strap
Camera
3. Insert the power adapter (9V DC) into the power jack at bottom of the camera unit and then plug into a wall
outlet.
4. Once the camera has been mounted adjust the camera head for the ideal viewing position.
For the best visual performance, mount the camera between 7 to 12 feet above the viewing area.
Adjusting the Camera
To get the best performance from the camera, please make the following adjustments on the camera.
• INFRARED: The camera contains built-in
InfraRed Illuminators (8 LEDs) that provide
short range night vision. Turn the Illuminators
off during day-time use by using the switch
located on the bottom right side of the camera.
• Sound Sensitivity: Adjust the sound trigger sensitivity using
the dial on the top right-hand side of the camera. Increasing
the trigger setting will increase the ability of the camera to
detect sounds. This feature only works when the monitor is
set to Scan.
• CAMERA CHANNEL: The 1.8” Portable Wireless Security
System can view up to 3 cameras. When adding a second
camera, set the CHANNEL SWITCH located on back of the
camera to position 2. When adding a third camera, set the
CHANNEL SWITCH to position 3. The first camera is preset to
position 1.
This camera is for use with the Spectare Portable
Wireless Security System Model SP 06241. It is not
recommended or guaranteed for use with other
systems. Please refer to the user manual for your
Spectare Security System for complete instructions.
Specification
Camera(Transmitter)
TV System: PAL or NTSC standard
Integrated Lens: 5.6mm, fixed focus
Resolution: 360 horizontal TV lines
Signal/Noise Ratio: 48dB
Image Sensor: 1/3”CMOS
Min. Illumination: 0.1 lux
Current Consumption: 150mA
Frequency Range: 2.41~2.47 GHz
Modulation: FM
Channel Selection: Electronic tuning with PLL
Overall Size: 3.75” W x 4.25”H x 2.45”D
95mmW x 107mmH x 62mmD
Approvals
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference
received, including interference that may cause
undesired operation.
CE directive 95/5/EC, EMC directive 89/336/EEC, LV
directive 73/23/EEC.
This class B digital apparatus complies with Cana
dian ICES-003.
Spectare is a registered trademark of SuMaWah LLC. © 2006
www.spectareproducts.com
MADE IN CHINA
Wall Mounting Instructions
and Drilling Template for Camera
For wall-mounting camera(s), drill two holes using a 1/4” drill bit
and the template below. Then place the supplied screw/anchors
supplied with the Wall Mounting Hardware into the holes. Finally,
attach the slots on the back of the Camera to its respective screw/
anchor on the wall.
Please contact the original retail location where this
product was purchased to obtain warranty
information and service.
2
user's guide
1
Spectare Infrared Security Camera
