SPECS PHOIBOS 100, Руководство пользователя

Страница: 43 / 99

Chapter
4
Installation
4.1 Unpacking
All analyzers and associated electronics are carefully packed before leaving the factory.
Carefully examine all packages for damage, especially the shock and tilt sensors inside
and outside the transport container. If damage is suspected please contact SPECS imme-
diately for further instructions on what to do next.
The analyzer should remain in its protective packaging until it can be bolted directly
onto the system. Take great care when unpacking to prevent damage. Do not rest the
analyzer on the ceramic feedthroughs, lens or the viewport. Handle parts on the vacu-
um side of the flange seals using normal UHV protection, i.e. wear gloves and use clean
nonmagnetic tools.
The analyzer is evacuated. In order to avoid any damage, modest vacuum conditions
(10 -3 mbar) have to be maintained. Please check vacuum conditions every three months
when storing the analyzer.
Please note the parts list in section 2.1 “System Description, Package Contents” on page
5.
4.2 Mounting the Detector
Caution!
Remove the three transportation locks before mounting the detector.
PHOIBOS 37