Full HD Bullet
IP Camera
Quick Start Guide
Welcome
Thank you for purchasing this network camera!
This quick guide is designed to be a reference tool for your
system.
Please read this guide carefully before operating the unit
and retain it for future reference.
Should you require any technical assistance, please contact
our technical support.
Important Safeguards and
Warnings
1.
Electrical Safety
All installation and operation here should conform to local
electrical safety codes.
Please check if the power supply is correct before operating
the device.
Use a certified/listed 12VDC Class 2 power supply only.
Note: Do not connect two power sources to the device at
the same time; it may result in device damage!
We assume no liability or responsibility for all fires or
electrical shock caused by improper handling or installation.
2.
Installation
Do not apply power to the camera before completing
installation.
Please install the proper power cut-off device before
installing wiring.
3.
Qualified Personnel
This camera should be installed by qualified personnel only.
All examination and repair work should be done by qualified
personnel.
Any unauthorized changes or modification could void the
warranty.
4.
Environment
This product should be installed in a cool, dry place away
from direct sunlight and heat sources.
Please transport, use, and store the device within the
allowed temperature and humidity ranges.
Do not install the product in extreme temperature
conditions.
Do not expose the camera to electromagnetic radiation.
Otherwise it may result in CMOS sensor failure.
Do not block any ventilation openings.
Do now allow water and liquid intrusion into the camera.
Heavy stress, strong vibration or exposure to water are not
allowed during transportation, storage and installation.
5.
Operation and Maintenance
Do not disassemble the product. There are no components
which are serviceable by the user.
Please shut down the device and unplug the power source
before beginning any maintenance work.
Do not touch the CMOS sensor optic component. You can
use a blower to clean the dust on the lens surface.
Always use dry soft cloth to clean the surface. If there is too
much dust, use a cloth dampened with a small quantity of
neutral detergent.
Use a professional optical cleaning method to clean the
enclosure. Improper cleaning such as using cloth may result
in poor IR functionality and/or IR reflection.
Statement
This guide is for reference only.
Product, manuals and specifications may be modified
without prior notice. Speco Technologies reserves the right
to modify these without notice and without incurring any
obligation.
Speco Technologies is not liable for any loss caused by
improper operation.
Note
:
Before installation, check the package and make sure that
all components are included.
Contact your rep or Speco customer service department
immediately if something is broken or missing in the
package.
Accessories
Accessory
Qty
Network Camera
1
Quick Start Guide
1
Installation Accessories
1
CD
1
1
Physical Specifications
1.1
Cable
Refer to the following figure for cable
information.
Figure 1-1 Cable
Please refer to the following table for details
No
Port
Function
Connection
Note
1
LAN
Network
Ethernet
jack
Data
2
DC
12V
Power input
DC jack
Power
1.2
Dimensions
Please refer to the following figure for
dimension information. The unit is in mm.
See figures 1-2 and 1-3.
Figure 1-2 Front
Figure 1-3 Side
2
Device Installation
Note: Please make sure the installation
surface can support a minimum of 3 times
the weight of the camera.
Figure 2-1 Installation
Please see Figures 2-1 and 2-2.
