Speco N64NR, Руководство пользователя, Страница: 73 / 114

Alarm Management
NVR User Manual
handling setting of object detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).
3 Click “Apply” to save the settings. You can click “Object Config” to go to the object detection configuration
interface.
9.4.6 Tampering
Tampering Configuration :
1 Click Start

Settings

Camera

Smart Settings

Tampering to go to the following interface.
2 Select the camera and enable the relevant detection as needed.
Scene Change : Alarms will be triggered if the scene of the monitor video has changed.
Video Blurred : Alarms will be triggered if the video becomes blurry.
Video Color Cast : Alarms will be triggered if the video becomes obscured.
3 Set the sensitivity of the exception detection.
4 Click “Apply” to save the settings.
5 Click “Processing Mode” to go to the alarm handling configuration interface of exception detection.
Exception Alarm Handling Configuration :
1 Click Start  Settings  Alarm  Smart Event  Exception to go to the interface.
2 Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The alarm
handling setting of exception detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).
3 Click “Apply” to save the settings. You can click “Exception Config” to go to the exception detection configuration
interface.
66