Speco N4NRL Скачать руководство пользователя страница 36

Страница: 36 / 77

Record & Disk Management

NVR User Manual

Go to “Edit Schedules” interface and then click

to edit the schedule. The settings of “Edit Schedule” are similar to that of the “Add Schedule”.

Click

to delete the schedule.

7.4 Record Mode

7.4.1 Manual Recording

Method One

: Click

on the tool bar at the bottom of the live view interface to enable recording of the camera.

Method Two

: Go to the live view interface and then click the right-click menu “Manually Record On” in the camera window or click

on the tool

bar under the camera window to start recording.

7.4.2 Timing Recording

Timing Recording

: the system will record automatically according to the schedule.

Set the timing record schedule of each camera. See 7.3 Schedule Setting for details.

7.4.3 Motion Based Recording

Motion Based Recording

: the system will start motion based recording when the motion object appears in the setup schedule. The setup steps are

as follows:

①

Set the motion based recording schedule of each camera. See 7.3 Schedule Setting for details.

②

Enable the motion and set the motion area of each camera. See 9.2.1 Motion Configuration for details.

The camera will start motion based recording once you finish the above settings.

7.4.4 Sensor Based Recording

①

Set the sensor based recording schedule of each camera. See 7.3 Schedule Setting for details.

②

Set the NO/NC type of the sensor, enable the sensor alarm and then check and configure the “Record”. See 9.1 Sensor Alarm for details.

7.4.5 Analytics Recording

①

Set the analytics recording schedule of each IP camera. See 7.3 Schedule Setting for details.

②

Enable the intelligence alarm detection (object detection, exception, tripwire or intrusion) and draw alert surface or warning area of each IP

camera. See 9.3 Intelligence Alarm for details.

The camera will start analytics recording once you finish the above settings. This function is only available for some IPCs.

7.5 Disk

7.5.1 Disk Management



Disk Management

Click Start



Settings



Disk



Disk Management to go to disk management interface. You can view the NVR’s disk number and disk status and so on

in the interface. Click “Formatting” button to format the HDD.

Note: Click Start



Settings



Record



Mode Settings and then set the manual record time in the

interface. Click “Apply” to save the settings.

Содержание N4NRL














































































Результаты поиска

Содержание N4NRL

Отзывы:

Похожие инструкции для N4NRL

Бренды по названию

Популярные бренды

Speco N4NRL, Руководство пользователя

Результаты поиска

Содержание N4NRL

Отзывы:

Похожие инструкции для N4NRL

Бренды по названию

Популярные бренды