AI Event Management
NVR User Manual
54
Configure the schedule
Set the text prompt and voice prompt. The text will show on the captured picture and the voice will be broadcasted when detecting a stranger.
Trigger record, snapshot, alarm-out, buzzer, push, pop-up video, E-mail and pop-up message box as needed. The alarm linkage settings are
similar to the face detection alarm (See 9.1.1 Face Detection Settings for details).
Click “Apply” to save the settings.
④
Click “+” to add more successful recognition tasks. Select the added task and then click “–” to delete it.
9.2 License Plate Recognition
Please add the ANPR camera before you using this function. If your camera doesn’t support this function, please skip the following instruction.
Please set face recognition function according to the following procedures for the first time.
Enable and set plate detection
Add plate group
Add plates to the plate group
Enable license plate recognition
Set successful recognition (or strange plate) alarm linkage
9.2.1 License Plate Detection Settings
Click Start
AI/Event
AI Event
LPR to go to the following interface. Select an ANPR camera and click the “Detection” tab as shown below.
Set the plate size by defining the maximum value and the minimum value (The default size range of a single plate occupies from 5% to 50% of the
entire image).
Display range: if enabled, the set maximum detection box and the minimum detection box can be displayed on the left window.
Please select the entrance and exit according to the actual scene.