Speco N16NRE Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 116

Speco N16NRE Скачать руководство пользователя страница 40

Record & Disk Management

NVR User Manual

35

Click “All” to set all week recording; click “Reverse” to swap the selected and unselected time in a week; click “Clear All” to clear all the selected area
in a week.

7.1.3 Advanced Configuration

Click Start



Settings



Record



Advanced to go to the following interface. Enable or disable cycle record (cycle record: the earliest record data will

be replaced by the latest when the disks are full). Choose the record stream. Set the pre-alarm record time, post-alarm record time and expiration
time of each camera and then click “Apply” to save the settings.

Pre-alarm Record Time: set the time to record before the actual recording begins.
Post-alarm Record Time: set the time to record after the actual recording is finished.
Expiration Time: set the expiration time for recorded video. If the set date is overdue, the recorded data will be deleted automatically.

7.2 Encode Parameters Setting

Click Start



Settings



Record



Encode Parameters to go to the interface as shown below. Set the encode, resolution, FPS, GOP, bitrate type, quality,

max bitrate and audio of main stream for each camera in “Event Recording Settings” and “Schedule Recording Settings” interfaces. Click “Apply” to
save the settings. You can set the record stream of each camera one by one or batch set them for all cameras.

7.3 Record Mode

7.3.1 Manual Recording

Method One: Click

on the tool bar at the bottom of the live view interface to enable recording of the camera.

Method Two: Go to the live view interface and then click the right-click menu “Manually Record On” in the camera window or click

on the tool

bar under the camera window to start recording.

Note: Click Start



Settings



Record



Mode Settings and then set the manual record time in the

interface. Click “Apply” to save the settings.

«
...
38
39
40
41
42
...
»

Содержание N16NRE





















































































































Отзывы:

Нет отзывов