PTZ
NVR User Manual
31
Play or Stop Trace
Select the trace and click
to play the trace; click
to stop the trace.
Modify the Trace Name
On the left panel, enter new trace name and click
to modify and save the trace name.
Delete the Trace
Click
to delete the trace. Or put the cursor on the trace name (right panel) and then
will appear on the right corner of the trace name;
click it to delete this trace.
6.6 Task Settings
Click Start
Settings
Camera
PTZ
Task to go to the interface as shown below.
①
Select a PTZ camera.
②
Select function, such as preset, cruise, trace, random scanning, etc.
③
Select a name, such as preset name, cruise name, etc.
④
Select the start and end time.
⑤
Click “Add” to add the task.
⑥
Click
to extend the tasks of the PTZ camera. Click
beside “Enable” to enable the task. After the task is enabled, the PTZ camera will
start the specific task at the specified time.