Congratulations on your purchase of Speco Technologies’
MCHH-100 Handheld Dynamic Microphone!
Speco Technologies has leveraged over 40 years of audio industry experience to bring you the highest level of quality
performing microphones in the industry. Our MCHH-100 Handheld Dynamic Microphone features a high sensitivity
and wide frequency response curve. This combined with a cardioid directional pattern is tailored for crystal clear
speech and vocals.
Specifications:
Element:
Dynamic
Polar Pattern:
Uni-directional
Frequency Response:
50Hz~16kHz
Input Impedance:
700 ohms ±30%
Sensitivity:
-54dB ±3dB (0dB=1V/Pa at 1kHz)
Output Impedance:
600 ohms ±30%
Frequency Response Graph:
Connecting and disconnecting the microphone cable:
1. Insert the XLR connector end of the microphone cable into the microphone. If necessary, rotate the
connector to align the ridge on the cable connector and the groove in the microphone socket.
Push the connector into the microphone until it clicks.
2. To disconnect the cable and microphone, grasp the connector while
depressing the tab. Pull the connector away from the microphone.
Caution:
1. If the head of the microphone is covered by a hand or brought close to the speaker, a howling sound
may be generated. To prevent this, first decrease the volume, then place the microphone so that it is
not pointed directly at the speaker and make sure that there is sufficient distance between the
microphone and speaker.
2. Due to the high sensitivity of the cartridge, do not drop the microphone or apply a jolting hit to it.
3. To maintain the sensitivity and quality of sound reproduction, avoid exposing it to moisture and
extreme temperatures.
Warranty:
Speco Technologies offers a limited 2-year warranty on our microphones. Please consult enclosed warranty card.
200 New Highway Amityville, New York 11701 • Outside Metro NY: 1-800-645-5516
631-957-8700 • www.specotech.com
