AP500M
AP500M
300Mbps, 5.8Ghz Long-‐Range Outdoor Network Video
Bridge
Thank you for your choice of Speco Technologies’
AP500M
Network Video Bride. This unit is designed and
manufactured to provide an efficient and high-‐powered long-‐distance network video bridge. Since this accessory
was designed initially as a means to wirelessly send a camera video signal up to 6 miles, this quick start guide
focuses on that specific feature of the unit. The
AP500M
has networking capabilities beyond that, so if you are
interested in using this unit as an access point or repeater, please contact our Technical Support department for
complete instructions. These units are sold each, but for point-‐to-‐point operation must be used in conjunction
with a second
AP500M
.
Included in box: 1 x
AP500M
, 1 x 24V PoE Injector, 1 x Mounting Bracket, 2 x Pole-‐Mounting Bracket Set, 1 x Cable
Gland, 4 x Screws
Initial Setup
1)
Connect the
AP500M
with a computer. The unit includes a PoE injector. The PoE side should be
connected to the
AP500M
through the middle opening. The LAN side should connect to your computer.
2)
Enter the network properties of your computer and change the IP address to somewhere in the
192.168.119.XXX range, with XXX being any number but 1.
