Atlas™ High Temperature Film Maker Accessory
17
This positioning and holding of the Top Half Assembly will allow access
to the protective film on both the top (
13
) and lower (
14
) polished
pressing surfaces. Remove (peel away) the protective films from both
the top (
13
) and lower (
14
) polished surfaces and clean the surfaces
using a soft lint free cloth or tissue and a suitable solvent (e.g. a
degreaser or acetone). Similarly clean all the spacer rings (
18
) (sizes A
through to F) before their initial use in the formation of a thin film.
Installation of the High Temperature Film Maker
Accessory into a Press
After removal of the protective films from the polished pressing
surfaces (
13
) and (
14
), return the Top Half Assembly of the Accessory
back to the
Sampling Position
, such that it is resting on top of the
Lower Half Assembly (lower cooling block (
3
) and heated pressing
surface assembly (
5
)). (See
Fig 6.
).
Fig 6. High Temperature Film Maker Accessory Ready for
Installation into the Press (Sampling Position)
Содержание Atlas GS15800
