Specac Atlas Autotouch 40T, Руководство пользователя

Страница: 45 / 84

Atlas™ Autotouch 40T Hydraulic Presses
43
along the base of the ( MOS ). When entering a particular Display
Screen environment you can carry out the functions allowed within that
environment, such as programming for a customized load/hold/release
sequence for the sample type to press or editing a particular saved
program. When the functions have been established within the
particular environment, return to the (
MOS ) environment is achieved
via selection and pressing of the Exit , an accept (tick) or reject (cross)
symbol box depending upon the particular Display Screen
environment.
Display Screen Environment Access Steps
There are five principle Display Screen environments that can be
accessed to view on the Display Screen (
4 ). They are:-
1) Main Operation Screen (
MOS ).
2) Options ( Opt symbol) Screen.
3) Program ( Pgm symbol) Screen.
4) Directory ( Dir symbol) Screen.
5) Editing ( Edit symbol) Screen.
The (
Opt ), ( Pgm ), and ( Dir ) Display Screen environments are
accessed from the ( MOS ), whereas the ( Edit) Display Screen
environments are accessed after stepping through either a ( Pgm ) or
( Dir ) environment route from the ( MOS ).
There are some slight differences in the Display Screen stepping
sequences to gain access to the varying environments depending on
whether the (
PZ ) program or a custom created ( P1 to P6 ) program has
been loaded to the ( MOS ) environment for running.
Display Screen Steps When (PZ) Program Loaded
If the (
PZ ) program is loaded to the ( MOS ) environment to run from
pressing the start button ( 11 ), a typical ( MOS ) that will be displayed is
shown as follows:-