Spearhead Twiga 555, Руководство пользователя

Страница: 62 / 63

Spearhead TWIGA
61
Warranty
Spearhead warrants that the Spearhead machine referred to in the Warranty Registration
Form will be free from defects in materials and workmanship for a period of 12 months from
the date of sale. This warranty does not affect your statutory rights, but merely adds to them.
Should you have a problem within 12 months from the date of sale please contact your
original Spearhead dealer, or Spearhead’s Service Department. Any part found to be
defective during this period will be replaced or repaired, at Spearhead’s discretion, by the
dealer or a Spearhead Service Engineer.
Warranty Conditions
1.
The Warranty Registration Form must be completed and returned to Spearhead
within 30 days of the date of sale.
2.
This warranty does not cover defects arising from fair wear and tear, willful damage,
negligence, misuse, abnormal working conditions, use in competition, failure to follow
Spearhead’s instructions (oral or written, including all instructions an recommendation
made in the Operator’s Manual) or alteration or repair of the machinery without
Spearhead’s approval.
3.
The machinery must have been serviced in accordance with the Operator’s Manual
and the Service Log must have been kept up to date and made available to the
dealer should service, repair or warranty work be undertaken
4.
This warranty does not cover claims in respect of wearing parts such as blades, flails,
paintwork, tyres, belts, hydraulic hoses, bearings, bushes, linkage pins, top links, ball
ends unless there is a manufacturing or material defect or the cost of normal
servicing items such as oils and lubricants.
5.
This warranty does not cover any expenses or losses incurred whilst the machinery is
out of use for warranty repairs or parts replacement.
6.
This warranty does not extend to parts, materials or equipment not manufactured by
Spearhead, for which the Buyer shall only be entitled to the benefit of any such
warranty or guarantee given by the manufacturer to Spearhead. Only genuine
Spearhead replacement parts will be allowable for warranty claims.
7.
All parts replaced by Spearhead under warranty become the property of Spearhead
and must be returned to Spearhead if Spearhead so request. Such parts may only
be disposed of after a warranty claim has been accepted and processed by
Spearhead.
8. Spearhead is not liable under this warranty for any repairs carried out without
Spearhead’s written consent or without Spearhead being afforded a reasonable
opportun
ity to inspect the machinery the subject of the warranty claim. Spearhead’s
written consent must, therefore, be obtained before any repairs are carried out or
parts replaced. Use of non-Spearhead parts automatically invalidates the.
Spearhead Warranty. Failed components must not be dismantled except as
specifically authorised by Spearhead and dismantling of any components without
authorisation from Spearhead will invalidate this warranty.
9. All warranty claims must be submitted to Spearhead on Spearhead Warranty Claim
Forms within 30 days of completion of warranty work.
Using the machine implies the knowledge and acceptance of these instructions and
the limitations contained in this Manual.