Spearhead SNIPER 600 SHD, Руководство пользователя

Страница: 39 / 50

8999128: v1 03/09/2018
Page 7.7 of 7.7 pages Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
7.8 Scheduled maintenance table
DESCRIPTION COMPULSORY
CHECKS MAINTENANCE INTERVALS
EVERY 8
HOURS EVERY 50
HOURS EVERY 400
HOURS EVERY 5
YEARS
GENERAL
MACHINE
CHECKS Grease X
Check bolt
tightness X
Check tools for
wear X
Check drive belt
tension X
Replace tools X
Replace drive
belts X
HYDRAULIC
SYSTEM Check tightness
of hydraulic hose
fittings X
Replace
hydraulic hoses X
GEARBOX Check gearbox
oil level X
Change gearbox
oil X
Check oil level of
drive shafts X
7.9 Cleaning the machine
•
Clean the machine at regular intervals, using a water blaster, focussing above all on any flammable materials left
on the machine. Make sure there is no straw, hay or flammable material left on any parts of the machine that get
hot.
•
Make sure the machine’s cables are in a good state of repair. Should you find that the jacket is worn or damaged,
replace the cable in question.
•
Where necessary, use mild biodegradable detergents, complying with pollution prevention regulations when it
comes to disposing of the waste cleaning water.
•
Dry the machine immediately after washing.
•
Do not use solvents, benzene or diesel oil, which could cause early deterioration of the gaskets and other plastic
elements as well as be a risk for lubrication of the machine in general.
WARNING! Only carry out cleaning operations with the machine disconnected from the tractor. Also simple
cleaning away of any residues of vegetation must always be carried out with the tractor engine switched off
and the hand brake on, keeping the ignition key in a pocket.