Spearhead Multicut
620
16
16
16
16
Height
To alter the minimum height of cut; fully raise the machine, remove pin A, slide
sleeve B forward or backwards to raise and lower cutting height respectively, replace
pin A through sleeve B and gently lower the machine. The sleeve B only controls the
minimum cutting height; however the operator may raise and lower the machine by
the hydraulic ram when the machine is in operation.
Use the height gauge as a guide when setting height of cut.
Wings
Before unfolding the wings if the machine is in the transport position, first pressurise
hydraulic rams before releasing locking pins and transport strap, lower wings by
releasing hydraulic pressure, leaving tractor spool in float position.
Unfolding the wings if the machine is in the
transport position, first pressurise hydraulic
rams before releasing locking pins, lower
both wings by releasing hydraulic pressure,
leaving tractor spool in float position.
A
B
