Front Mounted Machines
When using a front mounted machine, the operator should be aware that the
immediate work area is further away from his point of vision than a rear mounted
machine. Extra care should be taken when using this type of machine and the
intended work area should be thoroughly scrutinised immediately prior to work, to
check for potential hidden hazards. Hazards that cannot be removed should be
clearly marked to be made visible from the tractor cab.
Cutting heads will throw debris either forwards or backwards and it is vital that
suitable safety guards are fitted to protect either the operator, bystanders, or
property. Any side guarding fitted to the tractor should be fitted so that it does not
impede the operator’s view of the work area. Contact your tractor manufacturer or
local dealer for further advice.
Lighting Kits
For additional safety, rear mounted lighting kits are available from Spearhead if not
already fitted as standard. For more detailed information, contact the Department of
Transport or your local Highways Authority
Warning Signs
You are advised to display clear warning signs to indicate the type of machine when
working in public places. The signs should be carefully placed at either end of the
work site to give advanced warning of the hazard.
Contact your local Highways Authority or Department of Transport for more
information.
Roadwork guidelines:
On two-way roads, one set of signs should face the traffic in each direction.
Work should be within 1 mile of the signs.
Work only when visibility is good and at times of low risk, e.g. NOT during rush hour.
Vehicles should show an amber flashing light.
Vehicles should be conspicuously colored.
Debris should be removed from the road or path at regular intervals and the operator
should wear high visibility clothing.
Collect all warning signs promptly when the job is finished.
Training
It is the responsibility of the Spearhead dealer to provide instruction on the safe installation,
operation and maintenance of the machine in the first instance. Further training is available
from Spearhead Machinery Ltd on request, at cost.
Spearhead
Excel 606, 686, 726 & 836
9
