background image

   

AFTER SALES SUPPORT

 

0345 605 2070

       

29

       

WARRANTY

If your device develops a fault, please don’t hesitate to contact our customer service 

department on 0345 605 2070, we can solve 80% of problems via the phone.

1. These warranty terms cover additional warranty rights and do not affect your statutory 

warranty rights. All our products are covered by a 3 year manufacturer warranty.

2. Claims must be accompanied by proof of purchase. This must be in the form of a 

sales receipt or bank statement and must show that the product has been purchased 

within the warranty period as described under point 1, from the retailer that it was 

originally bought from. Please keep your receipt safe or staple it to the back of this 

manual for future reference.

3. Our warranty covers problems caused by material or manufacturing defects, and will 

result in the repair of these defects or replacement of the device with a like for like or 

similar article.

4. Our devices have not been designed for commercial, trade or industrial applications, 

any signs of use of the equipment in these application or equivalent activities, 

invalidates the warranty.

5. The following are also excluded from our warranty:
     A. Faults due to accidents, customer misuse or unauthorized repairs
     B. Consumable Parts such as chain, bar and other accessories that are compatible 

with the product.

     C. Failure due to lack of routine maintenance.
     D. Failure as a result of not using the equipment in accordance with the manual and  

safety instructions

Warranty claims should be submitted before the end of the warranty period, see point 1, 

but a paid service exists for repairs commissioned after this period. The original warranty 

period remains applicable to the device even if repairs are carried out or parts are 

replaced. In such cases, the work performed or parts fitted will not result in an extension 

of the warranty period, and no new warranty will become active for the work performed 

or parts fitted.

If you have any problems or questions concerning your garden power tool, please 

contact our after sales service at 0345 605 2070.
This device may be re-conditioned, like for like or upgraded replacement.

Содержание S2040EC2

































Отзывы: