USER MANUAL
AM-01/6
Pag. 10 di 14
AMB-02
As highlighted in the previous system diagrams, the AMB-02 control box is usually
placed close to the amplifier to which it is connected with a coaxial cable always to
antenna 1 or to the single output connector of the Combiner.
The coaxial cable that reaches the Matrix and therefore the antennas must be
connected to the opposite connector.
There are six LEDs on the panel, each representing the condition of the corresponding
antenna.
In the case of AM-01-SO2R:
•
Red LED means that the selected antenna is RTX for the band in use.
•
Green LED means that the selected antenna is RX only.
•
LED off means that the antenna is not selected.
In the case of AM-01-PW:
•
Red LED means that the selected antenna is RTX for the band in use.
•
LED off means that the antenna is not selected.
