5
Safety Instructions
SAFETY INSTRUCTIONS FOR ALL SCANPROBE CAMERA SYSTEMS
• Power Cord:
Do not use any power cord except the one supplied with the unit .
• Lifting:
Observe safe lifting procedures when lifting or moving any components of this system .
• Grounding:
If the system or any auxiliary components are connected to the power supply, then the external equipment must be
grounded in accordance with the manufacturer's instructions . Failure to comply with this may cause risk of electrocution .
• Power Adapter:
The power adapter supplied with the unit is not intended for use in outdoor environments . Do not attempt to
charge or operate the unit from the power supply outdoors .
• Health and Safety:
Sewer systems and other watercourses can be a source of biological hazards . Always use the appropriate PPE and
take suitable precautions to prevent infection when using the TrapJumper .
• Checks:
Before using the equipment, check all parts to ensure there is NO damage . Thoroughly inspect equipment to determine that
it will operate properly and perform its intended function .
NOTE:
When using a TrapJumper, it is critical that the user has received the relevant training and has a detailed
knowledge of the entire contents of the TrapJumper user manual . They must at all times comply with the instructions
in the document .
If you have any questions on the use of the TrapJumper camera system or require any additional information that has
not been covered in this user manual, please contact Spartan Tool, LLC or one of its authorized agents .
1. Lights:
The camera LEDs are very bright . Do not look directly at them or point them at other people's eyes when turned on .
2. Operating Temperature:
Battery:
Battery/Cell charging temperature range
50°F to 113°F / +10°C to +45°C
Battery/Cell discharging temperature range
-4°F to 140°F / -20°C to +60°C
WARNING:
Do not attempt to operate or charge the system outside the recommended temperature
specifications . Exposing the battery to temperatures above 140°F / 60°C may activate safety systems
and cause a permanent battery failure .
