20
Start-Up Guide
CHARGING AND POWER
1
2
3
4
5
1 . 230v Power lead
2 . 110v Power lead (64051697)
3 . 24v Explorer control supply PSU
4 . 12v Car charger (64051821)
5 . Explorer control box (6405CBOX)
NOTE:
Observe power voltage: the voltage of the power source must correspond with the information provided on
the equipment or power supply label .
CHARGING PROCEDURE
To begin charging, insert the power supply or car charger into the battery charging socket (connect to a source with a power cord using
PSU) . Charging begins as soon as power is connected . The charging procedure automatically recognizes the charge state of the battery .
Charge current will fluctuate according to the battery temperature and voltage . This protects the battery, which is always fully charged
when connected to a power source .
• Explorer control box, estimated battery life: 9 hours
• Explorer control box, estimated charging cycle: 4 hours
• Battery indication light will flash red and an alarm will sound to warn of low battery power .
NOTE:
Batteries and life cycles are given as estimates . To increase the batteries' life, health and longevity, please read
the battery maintenace section .
