19
Start-Up Guide
SONDE (LOCATOR) OPERATION
Sonde ON/OFF
button
• Engage the push button to turn on the 512 Hz sonde .
• The red light will illuminate to indicate the sonde is active .
CONNECTABILITY
CAUTION:
When connecting or disconnecting any cables or cameras, ensure the system is switched off and
disconnected from power supply .
• Do not expose mains cables/charges to rain or moisture .
• Keep all power cables clean . Contamination will increase the risk of electric shock .
• Connect all cables in accordance with the connector diagram .
• Check charging cables are not damaged . Do not use if damage is located . Purchase a new replacement from
Spartan Tool, LLC or a recommended repair center .
No. Description
Part No.
1
TrapJumper Camera
1024-1002-0
2
TrapJumper Coiler
1024-1001-0
3
Explorer Control Box
6405CBOX
