ADJUST SET TEMPERATURE POINT
(
) or
(
)
UP
DOWN
The SpaNET intelligent software constantly monitors
the spa water, automatically controlling the heater
and circulation pump to ensure the desired set water
temperature is maintained. The user can adjust the
set temperature point from 5 C - 41 C in steps of
0.2 C increments (Default: 38 C).
1)
the
button. The set temperature point will begin
adjusting up or down in 0.2 C increments.
2) Once the desired set temperature is displayed
press the
(
) button to confirm selection.
The XS-4000 features an integrated countdown
timer that enables the user to set an audible alarm to
sound after a user determined period (5-60 minutes).
The timer will count down the selected period and
show minutes and seconds remaining on the LCD as
it does. The timer icon (
) will be displayed in the
top right of the LCD screen whilst the timer is
running. Once the countdown time has elapsed the
topside panel will beep for one minute or until a
button is pressed.
1) Press the
(
) or
(
) button to
toggle the screen to the
(
) display mode.
2) Press
(
) to select desired time period.
o
o
o
o
o
To adjust the set temperature point:
To start the countdown timer:
Press and hold
OK
COUNTDOWN TIMER
UP
DOWN
TIMR
OK
Notes: 1) If the optional in-pool temperature sensor is fitted
the heater works off a 0.5 C hysteresis (thermostat). The
heater will raise the water to the set temperature point but
thereafter will not be re-activated until the water
temperature falls by at least 0.5 C. Therefore if the spa
user selects a set temperature point of 38 C the actual
water temperature will be anywhere between 37.5 C - 38 C
depending on when the user checks the temperature.
2) If the standard in-heater temperature sensor is used (i.e.
no optional in-pool temperature sensor fitted) the heater
works off a 2 C hysteresis (thermostat). The heater will
raise the water to the set temperature point but thereafter
will not be re-activated until the water temperature falls by
at least 2 C.Therefore if the spa user selects a set
temperature point of 38 C the actual water temperature will
be anywhere between 36 C - 38 C depending on when the
user checks the temperature.
NOTE: The pump(s), blower and light
time-out periods are NOT adjusted by the minute timer.
o
o
o
o
o
o
o
o
o
o
3) Press the
(
) or
(
) button to
adjust the timer in minute increments until the
desired time period is selected.
4) Press
(
) to confirm and begin countdown
For convenient user reference and to assist in
filtration & sleep time functions, your spa controller
includes a built-in real time clock. The user can
choose to display the time in either 12 or 24 hour
format. For ease of reference the current time and
day is displayed at the bottom left of the LCD
screen.
1) Press the
(
) or
(
) button to
toggle the screen to the
(
) display
mode.
2) Press the
(
) button to enter set time
adjustment.
3) Press the
(
) or
(
) button to
select the time format (12 or 24 HR). Press
the
(
) button to confirm selection.
4) Press the
(
) or
(
) button to
modify the weekday (Mon - Sun). Press the
(
) button to confirm selection.
5) Press the
(
) or
(
) button to
modify the hour. Press the
(
) button to
confirm selection.
6) Press the
(
) or
(
) button to
modify the minutes. Press the
(
) button
to confirm selection.
UP
DOWN
OK
.
CLOCK
UP
DOWN
TIME
OK
UP
DOWN
OK
UP
DOWN
OK
UP
DOWN
OK
UP
DOWN
OK
To set the clock:
XS-4000 Quick Reference Guide
OK
Buttons:
1.
2.
3.
4.
Pump A
Pump B
Pump C
Pump D
5.
6.
7.
8.
9.
10.
11.
12.
Indicator Lights
13.
14.
15.
16.
UP
OK
DOWN
Air Blower
One-Touch Sanitise
Light (On / Mode)
Light (Speed / Colour)
Invert Display 180
Auto Mode LED
Element On LED
Ozone/UV On LED
Sleep Cycle LED
o
DISPLAY MODES
UP
DOWN
LED INDICATOR LIGHTS
The XS-4000 topside panel features a large LCD
screen which displays three items: (1) Actual Water
Temperature (2) Set Temperature Point (3) Time &
Day. By default the actual water temperature is
displayed in the large digits (refer below).
There are four possible items that can be displayed
in the large digits: (1) Actual Water Temperature
[W.TMP]*; (2) Set Temperature [S.TMP];
(3) Countdown Timer [TIMR]; (4) Time Clock [TIME].
Press the
(
) or
(
) button to scroll
through these different display modes. As you scroll
through each item a brief title screen will be shown
followed by the actual display mode (note change in
icon).
Each display mode has a unique icon shown at the
top of the screen to indicate the current item being
viewed (refer below).
Note: There is a ten (10) second timeout on viewing non
default display modes. If no button press is sensed after 10
seconds the screen will return to the default display.
The AUTO LED indicator turns ON when
The Heater LED indicator turns ON when
the heater element is active.
The Ozone LED indicator turns ON when
the ozonator / UV sanitiser is active.
The Sleep Cycle LED indicator turns ON when
in a designated sleep cycle (if programmed).
the filtration pump is in automatic mode.
AUTO
O
3
zZz
SA SU
TU WE TH FR
MO
SET TEMP
SETTEMP
°C
°F
°C
°F
°C
°F
MODE
SPD
BRT
MODE
SPD
BRT
OFF
ON
AM
PM
AM
PM
10:30
38.0
Actual
Water Temp
W.TMP Display Mode Icon
Time & Day
Set Temp Point
W.TMP Water Temperature*
S.TMP Set Temperature
TIMR
Countdown Timer
TIME
Clock
* Default Display
OK
OK
OK
OK
OK
OK
OK
Safety Notes:
The appliance must be supplied through a
residual current device (RCD) having a rated residual
operating current not exceeding 30mA.
The appliance must be connected to a suitably rated and
weather protected power supply. The supply line should be a
dedicated power circuit and means for disconnection must
be incorporated in the fixed wiring in accordance with your
local wiring regulations. Means for disconnection from the
supply mains should have a contact separation in all poles
that provide full disconnection under overvoltage category III
conditions.
This appliance is
not intended for use by young children or infirm persons
without supervision.
I
I
I
I
OK
I
SPD/
CLR
1
2
3
4
9
8
5 6
7 11
12
13
14
15
16
10
AUTO
O
3
zZz
NOTE:
www.spanet.com.au/XS_support.html
For complete user manual please log on to
and
download PDF version from the User Manual link.