V.1605
Page | 6
SpaLINK App Overview
The SpaLINK app allows you to connect to, and take control of your SV Series equipped spa,
locally or remotely via a WiFi, 3G or 4G network, providing access to your spa from any location
at any time. Your Apple
®
or Android™ smart device becomes a wireless remote for your spa
enabling complete control over all spa accessories including pumps, air blowers, and LED spa
lights and lighting effects.
In addition the app provides total control over every possible spa configuration setting. There
are no shortened menus or minimal access to limited settings, the SpaLINK app allows complete
adjustment of all spa control settings as if you were standing in front of the spa.
Installing the SpaLINK App on your smart device
Download and install our app from the App Store
℠
for iOS devices.
Download and install our app from the Google Play™ Store for Android devices.
Our app can be found by searching for “Spanet SpaLink”
If you are searching for the app on an iPad the App Store will most likely show “no results
found”. Simply click on the top left hand corner where it says “iPad only” and change to “iPhone
only” and the app will be found. The iPhone app installs and works successfully on the iPad.
Register a User Account
Once you have downloaded and installed the SpaLINK app, before your spa and WiFi module
can be configured you must first register a user account with SpaNET. Your user account is the
portal between the smart device app and your spa. It provides a secure gateway to login and
access your spa and allows multiple SV controllers to be configured to the one user account,
should you be fortunate enough to own a dual zone swim spa or more than one spa. Your smart
device must have a WiFi, 3G or 4G Internet connection to complete the registration.
Содержание SV SmartLINK
Страница 1: ......
