manualshive.com logo in svg

SPALDING NBA Arena, Руководство пользователя, Страница: 31 / 32

Поделиться
Скачать
SPALDING NBA Arena Скачать руководство пользователя страница 31

31

52

SECURING SYSTEM WITH GROUND STAKE

3.

Secure system by hooking loose end of rope onto 

ground stake (52).
Place stake so that when it is screwed into the 

ground the rope is taut.

DO NOT OVER-CRANK 

HANDLE BEYOND THE 

MANUFACTURED HEIGHT-

INDICATOR RANGE OF  

7-1/2 - 10 FEET. DAMAGE 

MAY BE CAUSED TO THE 

SCREW JACK’S INTERNAL 

ADJUSTMENT MECHANISM 

IF ADJUSTED OVER 10 OR 

UNDER 7-1/2 FEET.

HEIGHT AND MOVING 

LABEL MUST NOT 

OBSTRUCT FACTORY 

ATTACHED WARNING 

LABEL.

LABEL AS APPROVED BY HUFFY SPORTS ENGINEERING

FOR OUTDOOR APPLICATION

2-5/8" Wide x 6-5/8" Long

568090 

06/06

1

3

2

MOVING SYSTEM

HEIGHT

ADJUSTMENT

1.  While holding pole, rotate basketball sytem 

forward until wheels engage with ground.

2.  Move basketball system to desired location.

3.  Carefully rotate basketball system upright.

4.   Check system for stability.

B

A

Rotate crank 

handle to raise 

and lower 

backboard 

CAUTION!

4.

Handle (20) can 

be removed and 

stored by removing 

pin (24).

NOTE:

24

20

LABEL AS APPROVED BY HUFFY SPORTS ENGINEERING

FOR OUTDOOR APPLICATION

2-5/8" Wide x 7-1/8" Long

574090 

12/06

MOVING SYSTEM

HEIGHT

ADJUSTMENT

 

B

A

Rotate crank 

handle to raise 

and lower 

backboard.

Do not over crank

handle beyond the 

manufactured height 

indicator range of 

7-1/2 - 10 feet. 

Damage may be 

caused to the screw 

jack’s internal 

adjustment 

mechanism if 

adjusted over 10 or 

under 7-1/2 feet.

1

3

2

4

1.

2.

3.
4.
5.

Adjust basketball backboard height to 

lowest postion.
Rotate handle forward until wheels 

engage ground.
Move basketball system to desired location.
Rotate handle back to original position.
Check system for stability.

53

If elevator is hard 

to adjust, 

slightly 

loosen bolts  

(circled areas).

      NOTE:

Apply Height Adjustment and Moving 

Label (53) to front of pole, where it is 

clearly visible.

Official rim height is 10-0’ (3.05 m) 

from top of rim to playing surface.

NOTE:

10 ft.

(3.05M)

Содержание NBA Arena

































Отзывы:

Нет отзывов