TM42-A Control System
1.
Blower
2.
Real time clock
3.
Heater
4.
Temp/Time setting Up
5.
Pump 1 and 2
6.
Power on/off
7.
Colour changer
8.
Light
9.
Temp/Time setting Down
A.
LCD display
Страница 1: ...TM42 A Control System 1 Blower 2 Real time clock 3 Heater 4 Temp Time setting Up 5 Pump 1 and 2 6 Power on off 7 Colour changer 8 Light 9 Temp Time setting Down A LCD display ...
Страница 2: ...ate automatically The LCD display is then dark All other functions are locked and can only be activated by pressing The system can also be switched off by pressing Heath and Filtration works according to what has been programmed in and the temperature can be shown by pressing 2 Heater The heater is adjusted using the buttons and between 5 43 C but by placing an extra thermostat in the heater that ...
Страница 3: ...These buttons are also used for setting the clock and filtration time In order to come to the setting mode the button is pressed until the time in the LCD display starts to flash The time is according to the pm and am system where am stands for the time between 0 00 12 00 night morning 00 00 12 00 and pm 0 00 12 00 afternoon evening 12 00 24 00 The first icon flashing is the clock and hours that a...
