Spacetronik STC-33 Combo, Руководство пользователя

Страница: 2 / 23

HD Digital Signal Meter Spacetronik STC-33 Combo – User manual
2 / 23
1. M
AIN
F
EATURES

Support DVBS/DVBS2/DVBT/DVBT2/DVBC/DVBC2 /MCNS

LNB short-circuit protection and indicator.

Extremely fast and accurate with high sensitivity
.

320*240 color LCD display with controllable back light.

Database editable by user easily.

Signal lock audible notification.

All DiSEqC protocol monitor based on 22KHz signal.

Firmware can be upgraded by USB port.

Database can be edited on PC and downloaded by USB port.

Power-supply100-240V/50/60Hz 12V@1A.

Ultra-long standby, low power consumption.

Fast charging Li-ion battery can last around 3 hours
DVB-S/S2

Real time Spectrum-Analyzer and transponder message detected

Angle calculation of azimuth and elevation
.

Azimuth and elevation measurement.

Satellite alignment system.

Power, CNR, CBER, VBER(DVBS), LBER(DVBS2) Modulation mode display.

DiSEqC1.0, DiSEqC1.2, USALS,SCD and SCD2 supported.

Auto DiSEqC identification for DiSEqC1.0

Cable identification for Quattro LNB easily
DVB-T/T2

Power, VBER(DVBT), LBER(DVBT2) SNR and CBER display.

Spectrum analyzer

SCOPE Display

Channel Auto Scan
DVB-C/C2/MCNS

Power, BER, PER(DVBC/MCNS), LBER(DVBC2), SNR and Symbol Rate display

Spectrum analyzer

Channel Auto Scan

Trunk voltage measurement (AC&DC)

Tilt Display