www.spacelabshealthcare.com
6 - 4
X P R E Z Z O N
A N D
Q U B E
O
P E R A T I O N S
M
A N U A L
R
E M O T E
A
C C E S S
4
Touch the red X in the top right corner of the Remote window to close the
window.
Full Bed Review
The optional Full Bed Review (FBR) feature lets you view multiple parameters at the
same time from a remote monitor.
The monitor where FBR is set up shows, within its capabilities, all available
parameters from the remote monitor. If more parameters are available from the
remote bedside than FBR can show, selecting any of these numeric keys causes the
selected parameter to replace the lowest parameter on the display.
Note:
Full Bed Review shows a single ECG lead if the remote bedside is configured to
show ECG data, using the full-view format or split-view format.
To use Full Bed Review (FBR)
1
From the main taskbar, touch the
Remote
icon.
2
Select
Remote View
.
3
Touch
On
.
4
Under
Select Subnet
, touch the subnet that you want to view
remotely.
5
Under
Select Bed
, touch the bed that you want to view remotely.
6
Touch
Full Bed Review
button.
The Remote window automatically closes after you touch the
Full Bed
Review
button.
To use Full Bed Review (FBR) when a remote
parameter is not shown
1
From the main taskbar, touch the
Remote
icon.
2
Under
Select Subnet
, touch the subnet that you want to view
remotely.
3
Under
Select Bed
, touch one bed that you want to view
remotely.
4
Under
Select Parameters
, touch one or more parameters that you want to
view remotely.
5
Touch
Full Bed Review
button to view all available parameters.
