élance
Vital Signs Monitor Operations Manual
Page 11-1
11 EtCO
2
Monitoring
Warning:
The élance Vital Signs Monitor does not have an exhaust
connector port, hence all sample gases will be exhausted into the
room.
Caution:
Possession or purchase of the
élance
Vital Signs Monitor with Oridion
Microstream Capnography does not convey any express or implied
license to use the device with unauthorized consumable CO2 sampling
consumable products which would, alone, or in combination with this
device, fall within the scope of one or more of the patents relating to this
device and/or CO2 sampling consumable products.
Note:
The
élance
Vital Signs Monitor Capnography is designed to be safely and
effectively used with the Oridion Microstream EtCO2 Accessories. Refer
to the
élance
Vital Signs Monitor Supplies and Accessories data sheet
(P/N 061-2193-00).
T
r discusses the EtCO
2
functionality
ital Signs
describing the different EtCO
2
menu options.
11.1 Activating/Deactivating EtCO Waveform
y default, if the Monitor with EtCO2 configuration is purchased, EtCO2 data will be
monitor, simply activate it
om the Setup menu.
S
TEPS
:
1.
Touch
the
Monitor Setup
key
from the Main Menu.
A Setup menu will appear.
2.
Touch
the
Clinical
from the Setup menu.
A Setup Clinical window, as shown
below, will appear.
his chapte
of the
élance
V
Monitor and
2
B
displayed on the
élance
Vital Signs Monitor. If the EtCO2 has been disabled, simply
enable from the monitor setup. If you require the EtCO2
fr
