Using the Monitor
élance
Vital Signs Monitor Operations Manual
Page 3-8
5.
Touch
the
OK
key to restore the saved user defaults as the monitor setup.
to quit if required.
r will be applied to new
3.3
an set the waveform:
Source
Size
Sweep
Speed
Beat Detect Spikes
Number
Color
The numbers
to
, as labeled in the figure below, represents the waveforms in the
Setup Waveform Window described in this section.
6.
Touch
the
Cancel
key
Note:
The user default saved in the
élance
Vital Signs Monito
patients automatically when a new patient is connected to this monitor.
Waveform
Settings
Setup the waveform area according to the patient’s requirements to be monitored. You
c
The five waveforms are:
ECG
Respiration / EtCO2
SpO
2
IBP 1
IBP 2
