Temperature Monitoring
élance
Vital Signs Monitor Operations Manual
Page 15-2
15.3 Getting into the Temperature Setup
You need to access into the Temperature Setup window to make any setting changes
o the Temperature monitoring.
t
S
TEPS
:
1.
Touch
the
Temperature Numerical Area
as illustrated below by the
icon.
A Setup TEMP window, as shown below, will appear.
2.
Set
the required
parameters
.
.
Touch
the
OK key
to confirm.
3
15.4 et Units
You can set the temperature units of measurement to °C or °F from the Setup Temp
window.
S
TEPS
:
1.
Touch
the
Temperature Numerical Area
.
A Setup TEMP window will appear.
2.
Touch
the
Units
S
key
.
A dropdown list, as shown below, will appear.
The bedside monitor’s temperature unit-of-measure will be changed to the same
as Central Station automatically when the monitor is connected to the élance
from
bedside monitor when the monitor is connected to a Central Station.
Central Station. Changes to the temperature unit-of-measure are not allowed
