INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 28 of 45
GB
Interventions every 1000 working hours
• Clean and/or replace silencers (
Fig. 29 ref. 1
):
1. Undo the four retaining screws and remove the
left side of the tyre changer or undo the fastening
screws to remove the whole pedal support unit
from machine front;
2. Undo the silencers (
Fig. 29 ref. 1
) onto the
pedal distributor controlling mandrel and bead
breaker;
3. Blow compressed air to clean or replace in case
of damages referring to spare parts catalogue;
4. Fit the filters onto their distributors;
5. Fit the tyre changer pedal support or side and
secure with the screws.
• Check the transmission belt (
Fig. 30 ref. 3
) for wear
or proper tensioning:
1. Undo the four retaining screws and remove tyre
changer side panel;
2. To tension up the belt (
Fig. 30 ref. 3
) Turn the
screws (
Fig. 30 ref. 4
) motor support (
Fig. 30
ref. 5
);
3. Replace the belt (
Fig. 30 ref. 3
) if worn out using
genuine parts;
4. Fit the tyre changer side panel before continuing
with assembly and disassembly procedure;
1
1
Fig. 29
Space s.r.l.
7300-M009-0_P
GA2645 - GA2645D - GA2645V
2
1
4
5
3
6
Fig. 30
ANY DAMAGE TO THE MACHINE
DEVICES RESULTING FROM THE
USE OF LUBRICANTS OTHER
THAN THOSE RECOMMENDED
IN THIS MANUAL WILL RELEASE
THE MANUFACTURER FROM ANY
LIABILITY!!
13.1 Lubricants
Special lubricant for mandrel movement control gear-
box. Use
ESSO GEAR OIL GX140
(for GA2645 and
GA2645V versions) and
ESSO GEAR OIL GX90 GX90
(for GA2645D version).
Lubricate slides and screws/nut screws or racks and
pinion with a soft brush using lubricant of
ESSO GP
.
ANY DAMAGE TO THE MACHINE
DEVICES RESULTING FROM THE
USE OF LUBRICANTS OTHER
THAN THOSE RECOMMENDED
IN THIS MANUAL WILL RELEASE
THE MANUFACTURER FROM ANY
LIABILITY.
