manualshive.com logo in svg

Space GA2645. Series, Инструкция по эксплуатации


Поделиться
Скачать
background image

INSTRUCTION, USE AND 

MAINTENANCE MANUAL

Page 10 of 45

GB

5.0  PACKING AND MOBILIZATION FOR 

TRANSPORT

   

   

   

HAVE THE MACHINE HANDLED BY SKILLED 

PERSONNEL ONLY. 

THE LIFTING EQUIPMENT MUST WITHSTAND 

A MINIMUM RATED LOAD EQUAL TO THE 

WEIGHT OF THE PACKED MACHINE (see para

-

graph “TECHNICAL SPECIFICATIONS”). 

The machine is packed in a carton box which size is 
mm 1150x1120x1900.
Movement must be by pallet-lift or fork-lift trolley. 
The fork lifting points are indicated on the packing.

Fig. 2

6.0 UNPACKING

DURING UNPACKING, ALWAYS 

WEAR GLOVES TO PREVENT ANY 

INJURY CAUSED BY CONTACT 

WITH PACKAGING MATERIAL 

(NAILS, ETC.).

The cardboard box is supported with plastic strapping. 
Cut the strapping with suitable scissors.  Use a small 
knife to cut along the lateral axis of the box and open 
it like a fan.
It is also possible to unnail the cardboard box from 
the pallet it is fixed to. After removing the packing, and 
in  the  case  of  the  machine  packed  fully  assembled, 
check that the machine is complete and that there is 
no visible damage. 

If in doubt 

do not use the machine 

and refer to pro-

fessionally qualified personnel (to the seller).
The packing (plastic bags, expanded polystyrene, nails, 
screws, timber, etc.) should not be left within reach 
of  children  since  it  is  potentially  dangerous.    These 
materials should be deposited in the relevant collec-
tion points if they are pollutants or non biodegradable.

THE BOX CONTAINING THE FIX-

TURES IS CONTAINED IN THE 

WRAPPING. DO NOT THROW IT 

AWAY WITH THE PACKING.

Space s.r.l.

7300-M009-0_P

GA2645 - GA2645D - GA2645V

Содержание GA2645. Series























































































Отзывы:

Нет отзывов

Похожие инструкции для GA2645. Series

Бренды по названию

Популярные бренды

Загрузить еще бренды