SPSWH.com SP Blue Solo 80 installation manual Doc
SP.
SP Blue Solo 80.E.2021.REV1.0
6
|
P a g e
3.2
Major Components & Specifications
The system consists of the following components as seen in figure 1 & 2
3.2.1
One (1) SP Blue Wave 2.9 solar thermal collectors
a.
Model: SP Blue Wave 29 (OG100 #10002144)
b.
Dimensions, 2.92m
2
(31.4 ft
2
), L=2006mm, W=1457mm, Height=85mm,
c.
Absorber Volume/capacity
–
5 litres
d.
Solar collectors can handle a max pressure of 16 bar (232 PSI)
e.
System pressure will be mains pressure recommended below 8 bar (116 PSI)
3.2.2
One 300 L (80 USG) storage tank
a.
Model: BLTG ECO 300
b.
Fill weight
–
300 kg (661.4 lbs)
c.
Storage tank has a maximum pressure rating of 10 bar (145 PSI)
d.
System pressure will be mains pressure recommended below 8 bar (116 PSI)
3.2.3
Optional 3.5 kW Electrical heating element and thermostat (for E models only)
1
a.
3.5 electric heating element…….
model # 107511-1016
b.
Thermostat………………………………
model # 108809-1017
c.
Anode………………………………………
model # 108803-0
d.
Rubber Flange…………………………..model # 100506
-875
e.
Tube material: incoloy 800
f.
8.5 mm diameter with 298 mm protruding into the tank
g.
Max current 20A, 240VAC, 1
ɸ
h.
Temperature range 10° - 85° C (50° - 185° F)
i.
“Overload or Overcurrent protection of electrically operated components shall be
consistent with the maximum current rating of the device and with the provisions of
article 240, Chapter 2 of the National Electrical Code.
”
3.2.4
6-point racking system
2
3.3
Included Components with the Kit
1. Temperature &
Pressure relief valve, with ¾” coupling to tank
2. Stainless steel hoses and insulation to connect collectors to storage tank
3. Racking hardware (roof penetrations to be supplied by contractor)
4. Collector compression fittings
–
pipping fittings etc.
1
See Wiring diagram in appendix
2
