Soyer UVR-300 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 64

Soyer UVR-300 Скачать руководство пользователя страница 59

Operating instructions UVR-300/UVR-400 | Heinz Soyer Bolzenschweißtechnik

59

10 Service

If servicing is required, please contact:

Heinz Soyer Bolzenschweißtechnik GmbH
Inninger Straße 14
82237 Wörthsee
Phone: 0049-8153-885-0
Fax:

0049-8153-8030

Email:

[email protected]

Please have the serial number ready during service requests.

Alternatively, you can also contact your respective SOYER

®

agent. The contact data is

available on our website at
www.soyer.de or
www.soyer.com (English)

11 Warranty conditions

The warranty period for commercial or equivalent use is 12 months. If repair is required,
we guarantee the correction of the defects at the Etterschlag plant. Wearing parts are
excluded.

The warranty claim shall expire if damage is caused through improper operation, repairs
or interventions are undertaken by unauthorised persons and accessories and spare
parts are used that are not intended for our system.

When using welding studs from external manufacturers, we do not assume any warranty
for proper function of the stud welding device and the quality of the welding joint.

«
...
57
58
59
60
61
...
»

Содержание UVR-300

































































Отзывы:

Нет отзывов