Soyer UVR-300 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 64

Soyer UVR-300 Скачать руководство пользователя страница 33

Operating instructions UVR-300/UVR-400 | Heinz Soyer Bolzenschweißtechnik

33

6.8

Cleaning the devices

Hazards during cleaning

Improper cleaning of the devices can endanger persons.



The device may only be cleaned by trained specialists.



Prior to starting work, the stud welding system must be disconnected from
the mains power supply and secured against accidental switch-on.



Work on electrical devices and components may only be carried out by
skilled electricians in accordance with the electrotechnical regulations.



Make sure that no detergents get into the device.

Do not use aggressive detergents for cleaning the device.

Make sure that any cleaning waste is disposed of in an environmentally safe manner.
Comply with the instructions of the detergent manufacturer.

Damage to the device due to incorrect cleaning

Improper cleaning may cause damage to the device.



Make sure that no detergents get into the device.



Do not use aggressive detergents for cleaning the device.

The frequency of cleaning depends on the operating conditions of the devices.

«
...
31
32
33
34
35
...
»

Содержание UVR-300

































































Отзывы:

Нет отзывов