Operating instructions UVR-300/UVR-400 | Heinz Soyer Bolzenschweißtechnik
25
6.5.2
Technical data for the UVR-400 universal feeder
Designation
UVR-400 universal feeder
Item no.
P01725
Working area
SOYER
®
threaded studs and pins with flange in accordance with
DIN EN ISO 13918
M10, Ø 10.8 and M12 from 12 - 40 mm in length
Optional possible: M6, Ø 7.1, M8 from 6 - 40 mm in length
Material
Steel, stainless steel, aluminium and brass
Feeding capacity
Approx. 20 - 50 studs/minute, depending on the dimensions and feed
length
Feeding quantity
max. 8 kg
Control connection
Direct connection to SOYER
®
stud welding device with feeder
interface
Mains connection
230 V, 50/60 Hz, 10 A
Fuse
Feeder control
2 x T 1 A (fuse 5x20 mm time-lag)
Compressed air con-
nection
5 up to 7 bar
Dimensions
570 x 440 x 680 mm (w x h x d)
Weight
76 kg (without studs)
Subject to technical changes
Hazards due to wrong fuse
Only replace fuses when the mains plug is disconnected!
Should it become necessary to replace fuses, only use fuses with the specified electrical values.
Oversized fuses could either cause defects in the electrical system or a fire.