Operating instructions UVR-300/UVR-400 | Heinz Soyer Bolzenschweißtechnik
15
2.6
Requirements on the part of the operator
The operator of the devices must ensure that the preconditions described in this
operating manual regarding safe operation of the devices are fulfilled. These include,
for example, conditions at the installation location, regulatory requirements for a safe
workplace, training of the operating personnel and qualified personnel in using the
device, if applicable, compliance with required maintenance work as well as monitoring
the intended use of the devices.
These operating instructions must be stored in the vicinity of the device.
The operator of the devices must ensure that all protective devices are present, active
and intact before the stud welding system is used.
2.6.1
Prerequisites for personnel
Operating personnel
The persons authorised to operate the devices must be familiar with the stud welding
system and trained accordingly. They must have read and understood these operating
instructions. When working with the stud welding system, they must also be able to avert
possible residual danger to themselves and third parties or minimise them as far as
possible.
To maintain the qualification, safety training must be carried out at least once a year. In
the event of malfunction or for maintenance, specially trained personnel or the
manufacturer must be consulted, if necessary.
Operators of stud welding equipment must have technical expertise for operating and
adjusting the devices properly as well as for properly carrying out weldings.
If welding personnel have to be qualified for certification of welding, the DIN EN ISO
14555 and DIN EN ISO 14732 standards are to be observed.
Trained electrotechnical personnel
The following generally applies:
Work on live elements may only be performed by authorised electricians. This work
must be performed in line with the applicable technical rules for electrotechnical devices.
All devices of Soyer Bolzenschweißtechnik GmbH must only be opened by
SOYER
®
personnel or personnel authorised by SOYER
®
.