Soyer BMK-10i, Руководство по эксплуатации, Страница: 52 / 74

52 Operating manual Soyer Bolzenschweißtechnik
11.2 Connection of the stud welding device and the stud welding guns
11.2.1 Mains connection
After installation, connect the stud welding device to the power supply using the mains
plug. To do so, observe chapter
“6.4 Technical data of the BMK-10i stud welding device”
on page 26.
When switching on the device, all LEDs on the front panel light up briefly.
11.2.2 Connecting the earth cable
A secure earth connection must be established
between the workpiece to which the studs are
welded and the stud welding device.
To do so, insert the earth cable into the socket
and turn the plug to the right up to the end stop.
Then connect the earth cable to the workpiece
(ensure a conductive connection).
Make sure the cable colour coding is correct when you establish the
connection.