Instruction Sheet:
Activity Tower 852000
Store these instructions along with the enclosed maintenance checklist
in a safe place. You may also access them on our website
.
Take time to familiarize yourself with the use and maintenance of this equipment before using. Please file this
Instruction Sheet in an accessible location. The Instruction Sheet must be read and familiar to anyone who is
using Southpaw Enterprises Equipment.
IMPORTANT: Please check equipment immediately for any damage that may have resulted during shipping.
If any damage has occurred, please contact Southpaw Enterprises, Inc. immediately.
MATERIALS LIST:
TOOLS NEEDED:
Base Panels
Base Panels
1
-
Activity Tower Floor
1
-
Panel
4
-
Activity Tower Legs
6
-
Joint Connectors
16
-
Joint Connectors
1
-
Maintenance Checklist
Important Notes (please read before assembling)
¨ We strongly recommend using a cordless drill with a hex driver to speed assembly. Take care to set the drill
’
s torque
so that it drives the screw fasteners completely without stripping them out. Also, make sure the drive is seated properly
in the screw, or the driver can strip out the head of the screw fastener
¨ If purchasing a slide, please note that this is an extremely large item. The slide was originally designed for outdoor
playground equipment where minor cosmetic blemishes occur during everyday use. It is also impossible to package and
ship this item in a manner that will keep it blemish
-
free, yet affordable to the end user. As such, it may arrive with some
slight scuffs to the surface. We apologize in advance for this possibility, but believe that this slide is by far the best, saf-
est, and most appropriate one available on the market for this application. We appreciate your understanding.
¨ The activity tower can easily be assembled with two people, and it is not extremely heavy. However, it may be prudent
to have a third person available, depending on the strength of those helping with the assembly process.
Assembly Instructions:
Please make sure the activity tower is in the room where it will be used before assembly, as it cannot be moved from
room to room once it is assembled.
1.
Begin by setting up the ladder & rung panel. Take one of the four activity tower legs and line up the holes with the
step and rung panel, making sure that the second set of holes on the leg are facing outward and are accessible for
the second panel. Using the joint connectors attach the first panel to the activity tower leg. Repeat with the second
activity tower leg attaching it to the opposite side of the step and rung panel.
2.
After determining how the panels are to be facing once assembled, take the next panel and attach to the post affixed
to the steps and ladder. Once attached with the joint connectors, add third activity leg to the opposite end of the
panel. Repeat on the opposite side. Once you have three panels attached, move the tower into place.
3.
Next, you will install the floor. Please note that one side of the floor will have additional holes with tee nuts. These
are for the installation of the slide and should be facing down and toward the panel that the slide will be extending
from. Once the floor is in place, secure with two or three joint connectors. Add the final panel to the bottom of the
activity tower and then complete securing the floor with the rest of the joint connectors.
