NET S9 user manual
14
Up
Turn over the page and reduce parameter values
Down
Turn over the page and increase parameter values
Left
The cursor moves left
Right
The cursor moves Right
3.1.2 LCD interface
After the completion of the system startup, LCD main interface will be displayed as shown in
figure 3-1. In the main interface mode, click this key
. Users can access to the parameters
of the interface for base station to launch coordinate system and modifications of different
schemes. The parameters of base station are as shown in figure 3-2.Under the arbitrary
parameter interface; press the return key
, returns to the main interface.
Fig. 3-1 LCD main interface
And the
SV
means visible satellite number;
BAT
means the built-in battery allowance;
MB
means receiver memory capacity and the
REC
light keep flashing shows that NetS9 is
receiving and recording static data.